Hide.me vpn on an archer a2300 password#
Hide.me vpn on an archer a2300 free#
Hide.me vpn on an archer a2300 mac#

If you don’t have a DDNS account, you have to register first by clicking Go to register. Otherwise, please select NO-IP or DynDNS. It is recommended to select TP-Link so that you can enjoy TP-Link’s superior DDNS service. In this case, you might apply the DDNS (Dynamic Domain Name Server) feature on the router to allow you and your friends to access your router and local servers (FTP, HTTP, etc.) using a domain name without checking and remembering the IP address.ĭDNS does not work if the ISP assigns a private WAN IP address (such as 192.168.1.x) to the router.Ģ.Go to Advanced > Network > Dynamic DNS.ģ.Select the DDNS Service Provider (TP-Link, NO-IP or DynDNS). However, the IP address can change from time to time and you don’t know when it changes. Most ISPs assign a dynamic IP address to the router and you can use this IP address to access your router remotely.

Hide.me vpn on an archer a2300 mac#

To reserve an IP address for a specified client device:ġ.Click Add in the Address Reservation section.Ģ.Click Scan or enter the MAC address of the client device.ģ.Enter the IP address to reserve for the client device.ĥ.Tick the Enable This Entry checkbox and click OK.

The Default Gateway is automatically filled in and is the same as the LAN IP address of the router.

To specify the IP address that the router assigns:Ģ.Enter the starting and ending IP addresses in the IP Address Pool.ģ.Enter other parameters if the ISP offers.

You can change the settings of the DHCP Server if necessary, and you can reserve LAN IP addresses for specified client devices.Ģ.Go to Advanced > Network > DHCP Server. Qos and IPTV cannot be enabled at the same time.īy default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the router acts as a DHCP server it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. Your IPTV setup is done now! You may need to configure your set-top box before enjoying your TV. If not, select the LAN type to determine which port is used to support IPTV service.ĥ )Connect the set-top box to the corresponding LAN port which is predetermined or you have specified in Step 3.

Select Custom if your ISP is not listed but provides necessary parameters.ģ )After you have selected a mode, the necessary parameters, including the LAN port for IPTV connection, are predetermined.

Select Bridge if your ISP is not listed and no other parameters are required.

If IGMP is not the technology your ISP applies to provide IPTV service:Ģ )Select the appropriate Mode according to your ISP. You can connect your set-top box to any of the router’s Ethernet port. If your ISP provides the networking service based on IGMP technology, e.g., British Telecom(BT) and Talk Talk in UK:ġ )Check the box for IGMP Proxy and select the IGMP Version, either V2 or V3, as required by your ISP.ģ )After configuring IGMP proxy, IPTV can work behind your router now. It is recommended to keep the default settings.ĥ.Specify two ports for link aggregation.Ĭonfigure IPTV setup to enable Internet/IPTV/Phone service provided by my internet service provider (ISP).ģ. The Link Aggregation feature combines two ports together to make a single highbandwidth data path, thus sustaining a higher-speed and more stable wired network.Ĥ.Select Hash Algorithm. If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same subnet with the old one, then you should reconfigure these features. And leave the Subnet Mask as the default settings.

Hide.me vpn on an archer a2300 password#

If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it.ġ.Visit, and log in with your TP-Link ID or the password you set for the router.ģ.Type in a new IP Address appropriate to your needs.

The LAN IP address together with the Subnet Mask also defines the subnet that the connected devices are on. The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to its web management page.

Backup and Restore Configuration Settings.

Chapter 12 Customize Your Network Settings.

Use PPTP VPN to Access Your Home Network.

Use OpenVPN to Access Your Home Network.

Make Xbox Online Games Run Smoothly by UPnP.

Hide.me vpn on an archer a2300 free#

Make Applications Free from Port Restriction by DMZ.

Open Ports Dynamically by Port Triggering.

Share Local Resources on the Internet by Virtual Servers.

Chapter 8 HomeCare – Parental Controls, QoS, Antivirus.

Manage the Router via the TP-Link Tether App.Chapter 5 Set Up the Router as an Access Point.Manually Set up Your Internet Connection.Chapter 1 Get to Know About Your Router.